English
Korea
TEL
82-2-844-8401
|
|||
| Battery input |
2/3/4 cell (6V~18V) | |
| Current |
Normal |
20A |
|
Max |
30A | |
| BEC |
5V/1Amp | |
| Soft Brake/Soft Start | ||
| ☆ wire jumped : Auto cell detected voltage cut-off mode | ||
| for LiPo battery(3.0V/cell cut off) | ||
| ☆ cut wire : Ni-MH battery mode(4.2V cut-off) | ||
| ▶Basic operation procedures | ||
| 1. TX switch ON (place TX control stick to stop position) | ||
| 2. Connect receiver/battery to speed control then Switch ON | ||
| 3. Move TX stick to max position (wait 1sec) then move down | ||
| to stop position | ||
| 4. done...(Motor will control undec TX stick) | ||
| 5. If not working, Reverse on the tx reverse switch | ||
| ◆ How to reset from low battery : | ||
| TX stick move to max and stop position | ||
| (0.5sec-max/0.5sec-stop) | ||