| SkyHolic - 20Amp Brushless ESC |
| Length : 36mm (1.4in) |
| Width : 24mm (0.95") |
| Height : 9mm (0.37") |
| Weight : 14g (5 oz) |
| |
| |
| For Unparalleled Sensorless Brushless Performance |
| - Automatically selects cutoff voltage for 2 to 3 cell Li-Po batteries (6V/9V) |
| - Automatically sets correct motor timing |
| - Safe power on mode prevents accidental stars |
| - Programmable braking (on/off) |
| |
| You must always use a fully charged battery pack in order to ensure proper cutoff |
| voltage is selected. Once a battery pack has been partially discharged and unplugged |
| from the ESC, reconnecting it before fully recharging the pack may result in the |
| incorrect voltage cutoff being selected, potentially causing damage to the pack. |
| |
| Servo Ratings with BEC Enabled |
| |
| If you wish to disable the BEC (required if you’re using more than 10 cells), you must |
| first remove the red receiver wire and then insulate properly to prevent shorting. |
|
English
Korea
